|
|
MC01 Polyolefin Shrink Film MC02 Low Temerature Polyolefin Shrink Film MC06 Polyolefin Shrink Bag Wrap Shrink Film Machine |
1
Product Instrusion
MC01 Polyolefin Shrink Film is a strong and transparent bidirectional shrinkable film, which can meet the needs of the conventional market.
Main features:
1, High transparency, good gloss, clear display of products, improve the grade of goods.
2, Flexible, easy to use, protect display products, reduce the probability of breakage.
3, shrinkage rate is large, fit molding, fit display products, tight package products.
4, Good heat sealing, high tensile strength, suitable for artificial, semi-automatic and high-speed automatic packaging scenarios.
5, High cold resistance, the material can maintain flexibility in the -10℃ environment without hardening and brittle phenomenon, suitable for packaging in cold environment storage and transportation.
6, Wide applicability, wide use, including daily necessities, cosmetics, electronic equipment, audio and video products and other packaging applications.
7, Good dustproof, with a certain dustproof performance.
8, No burrs, smooth cutting edge, no drawing residue.
9, Eager sealing border burst, customized type vent, sealing firm pull resistance.
Note: The illustration is only for example display, the final product needs to be adjusted according to customer's requirements.
2
Technical Specification
Recommended Temperature: 155-165℃
Note: The recommended temperature is not the absolute operating temperature, indicating the set temperature of the heating furnace in the heat shrink film packaging machine, not the surface or internal temperature of the product to be packed.Temperature adjustment can be adjusted according to different machine/temperature/transmission speed.
Available Thickness:
1.2C | 1.5C | 1.9C | 2.3C | 2.5C | 3C | 3.5C | 4C |
12μm | 15μm | 19μm | 23μm | 25μm | 30μm | 35μm | 40μm |
3gauge | 4gauge | 5gauge | 6gauge | 7gauge | 8gauge | 9gauge | 10gauge |
Note: C is stand for 10μm, 1mm =100C=1000Micron(μm), 1gauge = 0.254 micrometre(μm)
3
Modes Of Packing
4
Display Of Product
MINGCA POF Six Advantages
1
Product Instrusion
MC02 POF Lower tempertature wrap shrink film is a stronger and transparent bidirectional shrink film, suitable for the market demand of low temperature packaging products (such as cosmetics/food and other products requiring low temperature packaging scenarios).
Main features:
1, High transparency, good gloss, clear display of products, improve the grade of goods.
2, Flexible, easy to use, protect display products, reduce the probability of breakage.
3, shrinkage rate is large, fit molding, fit display products, tight package products.
4, Good heat sealing, high tensile strength, suitable for artificial, semi-automatic and high-speed automatic packaging scenarios.
5, High cold resistance, the material can maintain flexibility in the -10℃ environment without hardening and brittle phenomenon, suitable for packaging in cold environment storage and transportation.
6, Wide applicability, wide use, including daily necessities, cosmetics, electronic equipment, audio and video products and other packaging applications.
7, Good dustproof, with a certain dustproof performance.
8, No burrs, smooth cutting edge, no drawing residue.
9, Eager sealing border burst, customized type vent, sealing firm pull resistance.
Note: The illustration is only for example display, the final product needs to be adjusted according to customer's requirements.
2
Technical Specification
Recommended Temperature: 135-145℃
Note: The recommended temperature is not the absolute operating temperature, indicating the set temperature of the heating furnace in the heat shrink film packaging machine, not the surface or internal temperature of the product to be packed.Temperature adjustment can be adjusted according to different machine/temperature/transmission speed.
Available Thickness:
1.5C | 1.9C |
15μm | 19μm |
4gauge | 5gauge |
Note: The illustration is only for example display, the final product needs to be adjusted according to customer's requirements.
3
Modes Of Packing
4
Display Of Product
MINGCA POF Six Advantages
1. Uniform thickness, shrinkage rate up to 65%, can be used for all kinds of special-shaped packaging, packaging edge and corner soft. 2. The friction coefficient is stable, easy to use high-speed packaging machine. 3. The ratio between film layers is stable, and the sealing strength is large. 4. High transparency, strong flexibility, obvious packaging effect; 5. In the low temperature environment still maintain its flexibility; 6. High tensile strength, suitable for manual, semi-automatic and high-speed automatic packaging machine.
1
Product Instrusion
Main features:
1, High transparency, good gloss, clear display of products, improve the grade of goods.
2, Flexible, easy to use, protect display products, reduce the probability of breakage.
3, shrinkage rate is large, fit molding, fit display products, tight package products.
4, Good heat sealing, high tensile strength, suitable for artificial, semi-automatic and high-speed automatic packaging scenarios.
5, High cold resistance, the material can maintain flexibility in the -10℃ environment without hardening and brittle phenomenon, suitable for packaging in cold environment storage and transportation.
6, Wide applicability, wide use, including daily necessities, cosmetics, electronic equipment, audio and video products and other packaging applications.
7, Good dustproof, with a certain dustproof performance.
8, No burrs, smooth cutting edge, no drawing residue.
9, Eager sealing border burst, customized type vent, sealing firm pull resistance.
According to different product specifications, our company has launched the following different types of bags (flat bag, arc bag, corner bag, plane hole bag) for customers to use, as shown in the picture below.
Note: the illustration is only for example display, the final product needs to be adjusted according to customer's requirements.
二
Purchasing Information
Please fill in the purchase requirements according to the following table and send to our customer service for confirmation.
Customization Options | Specification | Length | Width | Thickness | Purchase Amount |
Announcements | Optional: flat bag, hole bag, arc bag, corner bag | Please be accurate to millimetres. | Please be accurate to millimetres. | Please be accurate to C. | At Least 2000 pcs |
Example | Flat Bag | 400mm | 350mm | 2.3C | 2000 pcs |
Note: For other products, please consult customer service for details.
3
Modes Of Packing
4
Display Of Product
MINGCA POF Six Advantages
1. Uniform thickness, shrinkage rate up to 65%, can be used for all kinds of special-shaped packaging, packaging edge and corner soft. 2. The friction coefficient is stable, easy to use high-speed packaging machine. 3. The ratio between film layers is stable, and the sealing strength is large. 4. High transparency, strong flexibility, obvious packaging effect; 5. In the low temperature environment still maintain its flexibility; 6. High tensile strength, suitable for manual, semi-automatic and high-speed automatic packaging machine.
1
Product Instrusion
A, the selection of high quality electric heating tube as the heat source, with the electric heating box special reflection and insulation device, so that the formation of a good thermal cycle, can improve the work efficiency, reduce loss, packaging effect is obvious and can effectively save energy;
B, conveyor belt adopts frequency conversion speed regulation, easy to operate, speed can be quickly adjusted;
C. Stainless steel plate is selected inside the heating box, and stainless steel tube and imported heat-resistant sleeve are used in the conveyor belt to make the equipment more solid and durable.
D, the scope of application is wide, the size of the packaging machine can be customized according to customer's actual requirements.
2
Technical Specification
Model Name | Overall Dimensions(mm) | Package Dimensions(mm) | KW | Transmission Line Speed | Power Supply（V） | The Weight（KG） | Using Range |
MJ－450 | 2100×900×1290 | 1220×450×250 | 6 | 1-3 | Three-phase 380 V | 200 | POF, PVC wrap shrinkable film |
MJ－1000 | 3000×1500×1360 | 1800×1000×300 | 20 | 1-3 | Three-phase 380 V | 300 | POF, PVC wrap shrinkable film |
3
Display Of Product
MJ-450 heat shrink packaging machine
MJ-1000 heat shrink packaging machine
4
Video Display